We’ll also need to insert the flat cable into a Raspberry Pi SBC ‘s camera connector, prepare a microSD card with the latest Raspberry Pi OS, and connect the board to a display and power supply.

Since the camera comes with a mounting thread it can easily be placed on a typical tripod. The first step is to screw the C-mount lens into the Global Shutter camera and secure it by tightening the back focus adjustment ring’s lock screw on the camera itself. Raspberry Pi Global Shutter Camera installation It has a narrow field-of-view as we’ll see in the review, and features focus and aperture adjustment rings. The other package comes with a PT3611614M10MP 16 mm C-mount lens that’s not exactly new because it’s also used with the Raspberry Pi High-Quality camera. We can also see some test point on the back of the camera. The back of the camera is protected by a plastic cover and the flat cable is already inserted into the connector. The Raspberry Pi Global Shutter Camera comes with a screwdriver to tighten the C-mount screw after the lens is installed. But I hadn’t access to it during the review, and the camera can be controlled just like any other Pi camera modules. The other side of the package has some information about the camera, and a link to a getting started guide that should work once this review is online. I received not one, but two packages because the Raspberry Pi Global Shutter Camera requires a separate lens. The company says the Global Shutter Camera will remain in production until at least January 2032. The Sony sensor offers high light sensitivity and can work with short exposure times as low as 30μs with adequate lighting for high-speed photography.

The camera ships with a 15cm ribbon cable and a screwdriver for the back focus lock screw.

Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU.

Electromagnetic Compatibility Directive (EMC) 2014/30/EU.

FCC 47 CFR Part 15, Subpart B, Class B Digital Device.

Weight – 34 grams, or 41grams with adapter and dust cap.

Dimensions – 38 x 38 x 19.8mm (29.5mm with adapter and dust cap).

Integrated IR cut filter (can be removed permanently if needed).

Lens standards – CS-Mount or C-Mount (C-CS adapter included).

Back focus length of lens – Adjustable between 12.5 and 22.4mm.Raspberry Pi Global Shutter Camera specifications The company sent me Raspberry Pi Global Shutter Camera sample together with a 16mm C-mount lens for review, and I’ll report my experience after going through the specifications of the new camera. Raspberry Pi Trading has just launched the 1.6MP Raspberry Pi Global Shutter Camera which can capture rapid motion without introducing artifacts usually experienced with rolling shutter cameras such as the earlier Raspberry Pi Camera modules, including the latest Raspberry Pi Camera Module 3.

Shutter count canon 700d online